Oce VarioPrint 5000 Operating Manual - page 159
Other manuals for VarioPrint 5000:
Operating Manual
of
360
5.9.3.3 Install developer station
A29246-X17-X-4-7680 / do501.fm
149
3.
Push the trolley in front of the
developer station bay so that the
stopper plate is touching the printing
system.
Adjust the lateral position of the trolley
to bring the telescopic rails on the
developer station into line with the
guide rails on the printing system.
4.
Push the left guide rail on the printing
system onto the telescopic rail on the
developer station. The catch must
engage hearably. Then push the right
guide rail on the printing system into
the telescopic rail. It must also engage
hearably.
Proceed as follows: