Oce VarioPrint 5000 Operating Manual - page 305
8.3.2 Clearing a paper jam
A29246-X17-X-4-7680 / do805.fm
295
8.3.2 Clearing a paper jam
The following sections describe what you must observe when clearing a paper jam in the
different areas of the printing system.
8.3.2.1 General information on paper jams >>> page 295
8.3.2.2 Information on removing paper >>> page 295
8.3.2.3 Clearing a paper jam in the flaps >>> page 296
8.3.2.4 Clearing a paper jam in the paper input, cascade or Interposer >>> page 298
8.3.2.5 Clearing a paper jam in the developer station >>> page 302
8.3.2.6 Clearing a paper jam in the transfer station >>> page 304
8.3.2.7 Clearing a paper jam in the fuser station >>> page 307
8.3.2.8 Clearing a paper jam in the paper output >>> page 311
8.3.2.1 General information on paper jams
• Paper jam between paper input and the reject tray:
All paper must be removed manually.
• Paper jam between the reject tray and the output:
– All paper between the input tray and reject tray is ejected automatically to the reject tray
from the point at which the jam occurs.
– Manually remove all paper between the reject tray and the jam location.
– Paper located downstream from the jam location is conveyed automatically to the
output tray after the jam occurs.
8.3.2.2 Information on removing paper
• To transport the jammed paper to a better position from where it can be removed, the
paper path has transport rollers with green unnumbered knobs.
• The paper path has flaps with green numbered release knobs. All flaps in the paper path
in which the paper has jammed must always be open so that all jammed paper can be
reached and removed.
• Take care not to tear the paper when removing it. Large formats are gripped
simultaneously with two paper transport rollers. The jammed paper can be positioned
better for removal by turning the adjacent transport rollers.