Oce VarioPrint 5000 Operating Manual - 5.7 Setting Up A Print Job
5.7 Setting up a print job
A29246-X17-X-4-7680 / do501.fm
111
5.7 Setting up a print job
This section contains an example of how to prepare a job via the menu, which actions you
must perform and what you need to check.
5.7.1 Print job details >>> page 111
5.7.2 Select menu settings of the print job >>> page 112
5.7.3 Performing mechanical tasks for print job >>> page 118
5.7.1 Print job details
• Check print contrast, fusing temperature and oiling and/or set to "Normal"
• same (synchronous) setting for both print units
• Printing in PCL mode
• Printing type: Automode
• Stack the paper with the front page facing down
• Paper shift 0 mpt
• Paper infeed information from the host: Do not select "Host info ignored"
• Mapping of physical input trays: Tray number mode
• Paper format ISO A4 (DIN A4):
Input from input trays 1, 2 and 3
• Paper format RA4 (DIN A4 uncut):
Input from input tray 4
• Tray number 1: ISO A4
tray number 2: RA4
• Stacking in output trays A and B
• Stack height: Maximum
• Mapping the output trays: Internal trays linked