Oce VarioPrint 5000 Operating Manual - page 251
7.3.4 Replacing the oiling roller
A29246-X17-X-4-7680 / do701.fm
241
7.3.4 Replacing the oiling roller
800,000 A4 pages can be printed with the oiling roller. After that,
a warning message
appears on the operator panel. If it is not replaced during the warning period of another
50,000 A4 pages, the printing system stops and an error message is displayed. The oiling
roller must be replaced at this point.
The procedure for replacing the oiling roller is the same for the upper and lower fuser
stations. The following section shows the procedure for the upper fuser station.
Paper formats and associated oiling rollers
For the various paper formats the associated oiling roller must be installed:
Important
Possibility of mixing up the oiling roller.
The oiling rollers have different widths for different paper formats. The oiling system
has markings for the various coating widths and the paper formats to which they
belong. When installing the roller, check that the coating ends against the marking
for the format of paper you are using.
Paper formats
Oiling roller
DIN A4, DIN A3
DIN A4 uncut
DIN A3 uncut
14"x11.7"
Variable formats: Width 11.06 in to 12.20 in
S26312-F1064
DIN B4, letter size
ledger size
Deutsches Schulbuch
SNI Manuals
Tabstock
Variable Formats: Width 8.54 in to 11.02 in
S29312-F1271
Legal size
DIN A4 SEF (short edge feed)
Foldsheet
Variable Formats: Width 210 mm to 216 mm
S29312-F1272