Oce VarioPrint 5000 Operating Manual - page 134
Other manuals for VarioPrint 5000:
Operating Manual
of
360
5.9.1 Preparing the Trolley
124
A29246-X17-X-4-7680 / do501.fm
Adjusting stoppers for the stations
Before replacing stations, check that the stoppers are in the correct position for the station.
Check the label. If the stoppers are not in the correct position:
Proceed as follows:
1.
Unfasten the star grip screw on the
left- and right-hand trolley stoppers.
2.
If the elevating platform hinders setting
the stoppers: Press the foot pedal and,
using the handlebar, fully lower the
elevating platform.