Oce VarioPrint 5000 Operating Manual - page 195

6.4.2 Cleaning the transfer discharge stick

A29246-X17-X-4-7680 / do601.fm

185

Important

Possibility of damage to the transfer discharge stick.

Only the supplied brush with plastic bristles may be used for cleaning the transfer 

discharge stick.

3.

Brush off the whole lower side of the 

transfer discharge stick with the 

supplied brush.

4.

Push the cleaning station back into the 

system.

5.

Take hold of the transfer station by the 

rotary knob and push in.

Rotate the knob to the right until it 

engages.

6.

Close the center doors.

Proceed as follows: