Oce VarioPrint 5000 Operating Manual - page 255
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.4 Replacing the oiling roller
A29246-X17-X-4-7680 / do701.fm
245
Installing the oiling roller
Proceed as follows:
Important
Possibility of mixing up the oiling roller.
The oiling rollers have different widths for different paper formats. The oiling system
has markings for the various coating widths and the paper formats to which they
belong.
When installing the roller, check that the coating ends against the marking for the
format of paper you are using.
1.
Engage oiling roller in oiling system.
The groove of the oiling roller on the
device side must be positioned on the
pin at the mounting of the oiling unit.
2.
Lower the oiling system.