Oce VarioPrint 5000 Operating Manual - page 37
2.6.6 Fire
A29246-X17-X-4-7680 / all203.fm
27
2.6.6 Fire
Observe the following instructions:
• Fire in the printing system can cause toxic gaseous emissions.
• Selfcontained breathing apparatus must be worn when fighting the fire. Instructions to this
effect should be deposited at the fire alarm center and with the local fire-fighting force.
• Fire can cause toxic arsenic gas to develop on the photoconductor drum.
• These security measures apply particularly in case of fire in locations where a number of
photoconductor drums are stored.
2.6.7 Disposal
Océ operates a system by which used parts and consumables can be returned for environ-
mentally sound disposal.
• Collect all parts and consumables that are to be returned for disposal. These will be
picked up by Océ Printing Systems GmbH or a commissioned shipping company or a
contracted disposal company and then recycled or disposed of appropriately.
• When disposing of a photoconductor drum, please observe the following:
– Before touching the drum, always put on the gloves provided with the drum.
– Should there be flaking of the photosensitive coating on the drum, carefully collect the
flakes or fragments of the coating.
– Store the photoconductor drum and any flakes of coating in the original drum packag-
ing.
– The drums and coating are hazardous waste and require special disposal. They should
be disposed of by Service or a Contracted Shipping Company. Keep this carton and its
contents out of the reach of children.
– Wash your hands afterwards.
2.7 Safety regulations and standards
The printing system complies with the relevant safety requirements for information technol-
ogy equipment. It meets the following national and international product standards and reg-
ulations:
• VDE 0805/11.93 / VDE-GS-mark