Oce VarioPrint 5000 Operating Manual - page 243

7.3.2 Replacing the sealing blade (cleaning)

A29246-X17-X-4-7680 / do701.fm

233

Proceed as follows:

1.

Press at the points marked on the 

mounting tool and remove the 

mounting tool.

2.

Push the new sealing blade into the 

groove of the mounting tool until it 

clicks into place.

3.

Use the mounting tool to position the 

new sealing blade in the center of the 

casing and press it onto the casing

4.

Remove the mounting tool from the sealing blade, return it and engage.