Oce VarioPrint 5000 Operating Manual - page 265
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.6 Replacing the transport belt
A29246-X17-X-4-7680 / do701.fm
255
Inserting the transport belt
8.
Carefully vacuum clean the area
around the transport belt rollers,
particularly around the edges.
Carefully vacuum the tilted rod in the
swivel rail.
Proceed as follows:
Caution
Possibility of damage to the transport belt.
Do not bend the transport belt and do not damage the edges.
1.
Push the new transport belt over the
forearm.
Hold the forearm before the transport
unit and carefully lift the edge of the
transport belt over the belt guides.
Proceed as follows: