Oce VarioPrint 5000 Operating Manual - 6.4 Weekly Cleaning
6.4 Weekly cleaning
A29246-X17-X-4-7680 / do601.fm
181
6.4 Weekly cleaning
The following weekly cleaning operations are listed in this section:
6.4.1 Cleaning the input trays >>> page 181
6.4.2 Cleaning the transfer discharge stick >>> page 184
6.4.3 Cleaning the fuser station weekly >>> page 186
6.4.4 Cleaning the operator panel >>> page 194
6.4.5 Cleaning the printing system generally >>> page 195
6.4.1 Cleaning the input trays
All input trays of the paper input, the cascade and the Interposer must be cleaned as
follows.
Caution
Printing system could start unexpectedly if not in the "Stop" status.
Before cleaning, ensure that the printing system is in the "Stop" status (press
button).
Proceed as follows:
1.
Press the input tray key.
The input tray is lowered. All display
lamps flash while this is happening.
Once the input tray has reached the
lower position, all associated indicator
lamps will be on.
2.
Press the key again. The input tray moves forward roughly 5 cm.