Oce VarioPrint 5000 Operating Manual - page 187

6.3.5 Cleaning the fuser station daily

A29246-X17-X-4-7680 / do601.fm

177

5.

Using a soft cloth, wipe any toner 

residue from the surfaces of the 

printing and fuser rollers and wipe oil 

residue (oil ring) from the ends of both 

rollers.

6.

Turn the rotary knob to the left. 

The paper wiper unit is returned to its 

original position.

7.

Clean the lower deflection segments 

with a soft cloth, paying particular 

attention to the area over which the 

paper runs.

Swivel on the lower deflection 

segments, making sure the yellow 

safety catch engages.

Proceed as follows: