Oce VarioPrint 5000 Operating Manual - page 166
5.9.6 Calculation and input of shrinkage compensation
156
A29246-X17-X-4-7680 / do501.fm
7.
Measure the shift of one color to the other on the print object for which the first
measurement was taken.
8.
Select the unit of measurement. Enter the measured value in the "Register
discrepancy of the object" area on the operator panel.
9.
Click
"Calculation of shrinkage factor" window is closed. The shrinkage factor is calculated
and automatically entered into the "Vertical shrinkage compensation" input field on
the operator panel.
Note
If you know the shrinkage factor yourself, you can enter it into the input field.
10. Click
For the next print, the second object is accordingly printed with shrinkage.
Proceed as follows:
Paper direction
Lea
ding
edg
e of
th
e sh
eet
Second measurement