Oce VarioPrint 5000 Operating Manual - page 140
Other manuals for VarioPrint 5000:
Operating Manual
of
360
5.9.2.2 Replacing fuser station on the trolley
130
A29246-X17-X-4-7680 / do501.fm
5.9.2.2 Replacing fuser station on the trolley
10.
Press in the spring catch on the left
telescopic rail and use your other hand
to push in the guide rail on the side of
the printer completely.
Then press in the spring catch on the
right telescopic rail and use your other
hand to push in the guide rail on the
side of the printer completely.
Proceed as follows:
1.
Transport trolley with the fuser station to the storage area.
2.
If the stoppers get in the way of the
raising and lowering the elevating
platform, carry out the following steps:
• Press the foot pedal and, using the
handlebar, fully lower the elevating
platform.
Proceed as follows: