Oce VarioPrint 5000 Operating Manual - page 295
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.12 Replacing paddles
A29246-X17-X-4-7680 / do701.fm
285
10.
Slot two new paddles onto the lever
one by one, pressing each firmly into
place. Make sure that the holes in the
paddle slot are aligned correctly with
the holding pins on the lever.
Raise the paddle lever again.
11.
Replace the empty platform on the
tray, making sure that the feet of the
platform slot into the holes.
12.
Slide the output tray back into the
printer. The catches should engage
noticeably.
Proceed as follows: