Oce VarioPrint 5000 Operating Manual - page 286
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.10 Replace photoconductor drum
276
A29246-X17-X-4-7680 / do701.fm
2.
Immediately insert the photoconductor drum together with the protective cover,
observing the reverse order of procedures..
3.
Carefully pull the protective cover from the photoconductor drum and place in the
carton. Both must be kept for later disposal of the photoconductor drum.
4.
Replace the hub on the flange shaft
and tighten the retaining screw.
5.
Replace the retaining plate and tighten
the star grip screw slightly.
Proceed as follows: