Oce VarioPrint 5000 Operating Manual - page 162

5.9.4 Menu settings for color printing

152

A29246-X17-X-4-7680 / do501.fm

5.9.4 Menu settings for color printing

5.9.5 Automatic menu settings when using MICR

In order to ensure proper printing with MICR QCDS, some settings are made automatically 

and cannot be changed by the operator.

The following table lists the menus and settings that are influenced by the use of MICR.

Proceed as follows:

1.

On the operator panel, select the  

menu.

2.

Select  menu.

3.

Select print mode "CustomTone Simplex" or "CustomTone Duplex".

4.

Click .

5.

Select the menu.

6.

In the "Upper print unit" and "Lower print unit" field,

• enter the value for "Color Verification ID".

• "Color effect".

If "Process color" is set in the upper print unit, "Custom Tone" is automatically 

displayed in the lower print unit and vice versa. 

• Enter "Color name"

7.

Select a color table in the "Standard color mapping table".

8.

Click .

Menu

Effect

As soon as MICR is used, a corresponding message is 

displayed.

The degree of density is automatically set to normal and 

cannot be changed.

The fusing temperature is automatically set to normal and 

cannot be changed.