Oce VarioPrint 5000 Operating Manual - page 145
Other manuals for VarioPrint 5000:
Operating Manual
of
360
5.9.2.3 Installing fuser station
A29246-X17-X-4-7680 / do501.fm
135
5.9.2.3 Installing fuser station
Proceed as follows:
Important
Possibility of damage to the fuser station when the elevating platform is raised.
The guide rails for the fuser station on the printing system must be fully pushed in.
1.
Only for the upper fuser station:
• Press the foot pedal and, using the
handlebar, and simultaneously lower
the elevating platform until it touches
the stops.