Oce VarioPrint 5000 Operating Manual - page 298
8.2 Messages on the operator panel
288
A29246-X17-X-4-7680 / do801.fm
8.2 Messages on the operator panel
You will find information on the following topics:
8.2.1 Locating error, warning, and informational messages >>> page 288
8.2.3 Continuing printing after correcting an error >>> page 292
8.2.1 Locating error, warning, and informational messages
If an error occurs, the printing system stops and the button
on the toolbar flashes.
If a warning is displayed, the button
on the toolbar flashes and the printing system
continues to print.
Information messages can be listed in the report of errors and warnings that have occurred.
They are marked by the
button. They may point out, e.g., open paper path flaps. If they
are not closed and the
displayed as an error message and the printing system remains in "Stop" status.
Tip
You find detailed information on every individual error and warning message via
context-sensitive Direct Help on the operator panel. You can call this context-
sensitive Direct Help by clicking the message and then pressing the F1 key.
Proceed as follows:
1.
Press
or .
A list of the errors, warnings and information sorted according to priority and date/
time and an internal view of the printing system is displayed on the operator panel