Oce VarioPrint 5000 Operating Manual - 1.2 Signposts
1.2 Signposts
2
A29246-X17-X-4-7680 / all101.fm
1.2 Signposts
This section 2 Safety gives you all necessary information on how to safely and efficiently
operate the printing system.
The structure of the printing system is graphically displayed in section 3 Description of the
printing system. It contains a short overview of the operating controls and gives you an
overview of the different paper paths for the various printing modes
(e.g. simplex printing, duplex printing, etc.).
The section 4 Operator panel describes the individual areas of the operator panel with the
most important symbols and buttons. You will also learn how to navigate in the menus, set
parameters and start and complete the replacement of consumables and expendables.
Section 5 Operating the printing system explains how to power the printing system on and
off, how to fill, remove and replace paper and how to set up a print job.
Section 6 Cleaning the printing system explains the intervals to be followed for cleaning
the different assemblies.
Section 7 Replacing consumables and expendables describes in detail all steps required
to replace consumables or expendables.
Section 8 Correcting errors will help you eliminate paper jams or distortions of the print im-
age.
The context-sensitive direct help on the operator panel provides information on the cause
and correction of specific error or warning messages.
Appendix will provide you with detailed information on all consumables and expendables.
In addition, the required cleaning agents and equipment are described along with the most
important technical data.
Specific subjects can be found more quickly by looking at the detailed index at the end of
the operating manual.
Note
Along with the operating manual, Help is also available in the operator panel of the
printing system. This Help is updated with every new version of the operator panel.