Oce VarioPrint 5000 Operating Manual - page 231
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.2.4 Replacing the fuser oil container
A29246-X17-X-4-7680 / do701.fm
221
Caution
If you pull out the fuser station too sharply and quickly, you could pull it beyond its
stop point causing it to drop to the floor. There is danger of injury to you and of
damage to the fuser station.
Always slide the fuser station slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
5.
Rotate the knob to the left until it
engages.
Take hold of the fuser station and pull
it towards you slowly and evenly.
6.
Unscrew the lid of the empty fuser oil
container, remove together with the
vacuum hose and hold up the hose.
Remove the empty fuser oil container.
Proceed as follows:
2
3