Oce VarioPrint 5000 Operating Manual - page 266
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.6 Replacing the transport belt
256
A29246-X17-X-4-7680 / do701.fm
2.
Carefully pull the transport belt along
the transport rollers until it lies between
the belt guides.
3.
Raise the axle bearings again and
tighten the knurled screws.
Caution
You could trap your fingers when lowering the transport belt unit.
Ensure that your hands cannot be trapped when lowering the transport belt unit.
4.
Release transport belt unit and lower.
Proceed as follows: