Oce VarioPrint 5000 Operating Manual - page 319
8.3.2.7 Clearing a paper jam in the fuser station
A29246-X17-X-4-7680 / do805.fm
309
Caution
Possibility of burns from the hot fuser station components.
Avoid touching hot components when removing jammed paper.
Possibility of damage to the fuser station.
Never try to remove paper with hard objects (pliers, tweezers etc.).
Do not lean on the fusingstation while it is pulled out.
The sharp edges of the paper wiper fingers can cut you.
Do not slide hands or fingers along the edges.
Possibility of damage to the paper wiper fingers.
Take care not to bend or fold the paper wiper fingers.
Sharp paper edges can cause cuts.
Do not slide hands or fingers along the edges.
Note
Possibility that fuser oil could soil clothing.
Avoid contact with the fuser station.
6.
Remove jammed paper.
7.
Turn the rotary knob to the left. The
paper wiper unit is returned to its
original position.
Proceed as follows: