NEC Univerge SV8100 Programming Manual - page 137
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 97
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional
Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
The number of each code (01~59).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing 705 (code 05) cancels a previously set
Camp-On.
Programs that may be affected with the changing the code.
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Input Data
Item
No.
Item
Terminals
Default
Related
Program
01
Bypass Call
Activating Call Forwarding/Do Not Disturb Override.
This code is available only if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
MLT, SLT
707
11-16-09
02
Conference
MLT, SLT
#
1
03
Override (Off-Hook Signaling)
MLT, SLT
709
04
Set Camp-On
MLT, SLT
750
05
Cancel Camp-On
MLT, SLT
770
06
Switching of Voice Call and Signal Call
MLT, SLT
712
07
Step Call
MLT, SLT
708
08
Barge-In
MLT, SLT
710
09
Change to STG (Department Group) All Ring
MLT, SLT
No
Setting
16-02
10
Station Speed Dialing
MLT, SLT
#
2