NEC Univerge SV8100 Programming Manual - 84-27 : Ipl Basic Setup
Issue 1.0
UNIVERGE SV8100
2 - 690
Program 84 : Hardware Setup for VoIP
Description
Use Program 84-27 : IPL Basic Setup
to set the DTMF Relay and the SRTP mode
of the IPL.
Program 84 : Hardware Setup for VoIP
84-27 : IPL Basic Setup
Level:
IN
Index 1
Slot Number
1
Input Data
Item
No.
Item
Input Data
Default
01
DTMF Relay Setup
0 = DTMF Relay disabled
1 = In-Band DTMF Relay -Do not
report to host processor
2 = Out of Band Relay - Do not
pass tones as voice
2
02
Setup CODEC Mode
Default means the system uses another
CODEC except G.723.
Mode 1 means the system uses all
CODECs, but the limitation of the total
number of available DSP will be applied.
0 = Default
1 = Mode 1 (G.723)
0
03
SRTP Mode Setup
0 = Disable
1 = Enable
0
04
SRTP Mode Select
0 = Mode1
0
06
H.245 Port Number
0~65535
10100
07
Preparation Completion Response
Port Number
0~65535
4000