NEC Univerge SV8100 Programming Manual - Program 34 : Tie Line Setup
Issue 1.0
UNIVERGE SV8100
2 - 400
Program 34 : Tie Line Setup
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level:
IN
Input Data
Class of Service
01~15
Item
No.
Name
Input Data
Default
Related
Program
COS 2~15
01
Receive Format
Use this option to specify the format of the
ANI/DNIS data received from the telco. Make
sure your entry is compatible with the service
the telco provides. The character indicates a
delimiter.
If PRG34-01-02 is selected to 2 (MF), this
PRG works only as 4 =*ANI*DNIS*.
0 = Address
1 = ANI
2 = DNIS
3 = ANI Address
4 = ANI DNIS
5 = DNIS ANI
( = Delimiter Code)
0
34-01-02
34-09-02
02
Delimiter Dial Code
This option defines the character Telco uses
as a delimiter (see entries 1~5 in Item 1
above). Valid entries are 0~9, #, and Q.
1~9, 0,
#
,
34-09-01
03
Route Setup of Receive Dial
This option specifies the source of the data
the system uses to route incoming ANI/DNIS
calls. If option 2 is selected, refer to Program
34-09-04.
0 = Fixed Route (Item
08) (No Routing)
1 = Routes on
Received DNIS or
Address Data
2 = Routes on
Received ANI
Data
0
22-09-01
22-11-01
34-09-04
34-09-08