NEC Univerge SV8100 Programming Manual - page 736
Issue 1.0
UNIVERGE SV8100
2 - 696
Program 90 : Maintenance Program
Description
Use
Program 90-02 : Programming Password Setup
to set the system passwords. For
password entry, the system allows eight users to be defined. Each user can have a:
Unique alphanumeric name (up to 10 alphanumeric characters)
Password entry of up to eight digits (using 0~9,
#
and )
Password level
The IN level password is used by the System Installer for system programming. The
SA or SB level password cannot access the IN level programs. The reverse type
(white on black) just beneath the Description heading is the program access level.
You can only use the program if your access level meets or exceeds the level the
program requires. (SA level password can access to SA or SB programs, and SB
level password can access to SB programs only.)
Program 90 : Maintenance Program
90-02 : Programming Password Setup
Level:
IN
CAUTION
Before changing your numbering plan, use the PC Programming or WebPro Programming to
make a backup copy of your system data.
Input Data
User Number
1~8
Item
No.
Item
Input Data
01
User Name
Maximum 10 characters
02
Password
Up to 8 digits
03
User Level
0 = Prohibited User
1 = MF (Manufacturer Level)
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
4 = SB (System Administrator Level 2)
5 = UA (User Programming Level 1)