NEC Univerge SV8100 Programming Manual - Program 47 : Inmail
Issue 1.0
UNIVERGE SV8100
2 - 510
Program 47 : InMail
Description
Use
47-08 : Call Routing Mailbox Options
to set the options for mailboxes assigned as
Call Routing Mailboxes in 47-07-02: Routing Mailbox Type.
Program 47 : InMail
47-08 : Call Routing Mailbox Options
Level:
IN
Input Data
Routing Mailbox Number
1~32
Item
No.
Item
Input Data
Default
01
Dial Action Table
Use this option to assign the Dial Action Table to the
Call Routing Mailbox. The Dial Action Table defines
the dialing options for the call Routing Mailbox.
1~16
(Dial Action
Table 1~16)
1 (Dial Action Table
1)
02
Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened Transfer
(TRF) from the Automated Attendant rings an
unanswered extension before recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling] Options:
Delay Rings Before Redirect Transfer in VM8000
InMail.
0~255 (sec)
Entering 0
causes
immediate
recall.
15
03
Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long VM8000 InMail waits
for an Automated Attendant caller to dial before routing
the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action
programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout
action programmed, the caller routes to that
destination.
When the associated Dial Action Table does not have
a Timeout action programmed, the Instruction Menu
repeats three times and then VM8000 InMail hangs up.
0~99 (sec)
Entering 0
causes the
Automated
Attendant to
immediately
route callers to
the Timeout
destination
programmed in
the active Dial
Action Table.
5