NEC Univerge SV8100 Programming Manual - 10-06 : Isdn-Bri Setup
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 19
Description
Use Program 10-06 : ISDN - BRI Setup to configure the ISDN - BRI Terminal
Endpoint Identifier (TEI), mode of operation, and Service Profile Identifier (SPID)
number for each circuit B-Channels.
Conditions
None
Feature Cross Reference
ISDN Compatibility
Program 10 : System Configuration Setup
10-06 : ISDN-BRI Setup
Level:
IN
Input Data
SLOT Number
1 ~ 24
ISDN - BRI Circuit
1 ~ 4
Item
No.
Item
Input Data
Default
01
TEI Selection
Selects the method the system
uses when assigning Terminal
Endpoint Identifier (TEI) values
to BRI ports.
0 = Select by SPID number
1 = Select by Channel ID number
0
02
DID Mode
0 = Route by Called Party Number
1 = Route by Redirecting Number
0
03
SPID 1
Dial up to 20 digits
No Setting
04
SPID 2
Dial up to 20 digits
No Setting