NEC Univerge SV8100 Programming Manual - page 514
Issue 1.0
UNIVERGE SV8100
2 - 474
Program 44 : ARS/F-Route Setup
Description
Use
Program 44-07 : Gain Table for ARS/F-Route Access
to set the gain/PAD table. If
an extension dials ARS/F-Route number:
The Extension Dial Gain Table, assigned in Program 44-05, is activated.
The Extension Dial Gain Table follows Outgoing transmit and Outgoing receive
settings.
If the incoming call is transferred to another line using ARS/F-Route:
The Tandem Gain Table, assigned in Program 44-05, is activated.
The Tandem Gain Table follows the Incoming transmit and Incoming receive
settings for incoming line, and Outgoing transmit and Outgoing receive settings for
the outgoing line.
For ARS/F-Route calls, the CODEC gains defined in Program 14-01-02 and
14-01-03 are not activated.
Program 44 : ARS/F-Route Setup
44-07 : Gain Table for ARS/F-Route Access
Level:
IN
Input Data
Gain Table Number
1~500
Item
No.
Item
Input Data
Default
01
Incoming Transmit
1~63
(-15.5 ~ +15.5dB)
32
(0dB)
02
Incoming Receive
1~63
(-15.5 ~ +15.5dB)
32
(0dB)
03
Outgoing Transmit
1~63
(-15.5 ~ +15.5dB)
32
(0dB)
04
Outgoing Receive
1~63
(-15.5 ~ +15.5dB)
32
(0dB)