NEC Univerge SV8100 Programming Manual - Program 31 : Paging Setup
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 381
Description
Use Program 31-06 : External Speaker Control to define the settings for the
external speaker using an amplifier.
Program 31 : Paging Setup
31-06 : External Speaker Control
Level:
IN
Input Data
External Speaker Number
1~9
Item
No.
Item
Input Data
Default
01
Broadcast Splash Tone Before
Paging (Paging Start Tone)
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
02
Broadcast Splash Tone After
Paging (Paging End Time)
Use this option to enable or
disable splash tone after Paging
over an external zone. If enabled,
the system broadcasts a splash
tone at the end of an External
Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
03
Speech Path
Determine if the external speaker
will be used for talkback (As this
option is not available with the
CD-CP00-US external page zone,
speaker 9 should be left at 1).
0 = Both Way (Duplex)
1 = One Way (PGD(2)-U10 ADP
J
SPK) (Simplex)
1
04
CODEC Transmit Gain Setup
1~63 (-15.5 ~ +15.5dB)
32
05
CODEC Receive Gain Setup
1~63 (-15.5 ~ +15.5dB)
32