NEC Univerge SV8100 Programming Manual - 14-06 : Trunk Group Routing
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 143
Description
Use Program 14-06 : Trunk Group Routing to set up an outbound routing table for
the trunk groups you assigned in Program 14-05. When users dial 9, the system
routes their calls in the order (priority) specified. For example, if a user dials 9 and all
calls in the first group are busy, the system may route the call to another group. Trunk
Access Map programming (Programs 14-07) may limit this option. The system
contains 100 routing tables for trunk access. Each table has four priority orders for
trunk access. There are 100 available Trunk Group Numbers.
Program 14 : Trunk, Basic Setup
14-06 : Trunk Group Routing
Level:
IN
Example for setting:
With less than four trunk groups,
Route Number 1
: Order 1 – Trunk Group 1
: Order 2 – Trunk Group 2
For the above setting, if all the lines in trunk group 1 are busy, the system searches
for an idle line in trunk group 2.
With more than four trunk groups,
Route Number 1
: Order 1 – Trunk Group 1
: Order 2 – Trunk Group 2
: Order 3 – Trunk Group 3
: Order 4 – 1002 (Jump To Route Number 2)
Route Number 2
: Order 1 – Trunk Group 4
: Order 2 – Trunk Group 5
For the above setting, if all the lines in the trunk groups 1, 2 and 3 are busy, the
system searches for an idle line in trunk groups 4 and 5.