NEC Univerge SV8100 Programming Manual - page 164
Issue 1.0
UNIVERGE SV8100
2 - 124
Program 13 : Abbreviated Dialing
Description
Use Program 13-04 : Speed Dialing Number and Name to store Speed Dialing data
in the Speed Dialing areas. This program is also used to define the names assigned
to the Speed Dialing numbers.
Program 13 : Abbreviated Dialing
13-04 : Speed Dialing Number and Name
Level:
SB
Input Data
Speed Dialing Bin Number
0~1999
Item
No.
Item
Input Data
Default
Related
Program
01
Speed Dialing Data
1~9, 0, ,
#
,
Pause (Press line key 1),
Recall/Flash (Press line key
2),
@ = Code to wait for answer
supervision in ISDN (Press
line key 3)
(max. 24 digits)
No
Setting
02
Name
Maximum 12 Characters
(Use dial pad to enter name)
No
Setting
03
Transfer Mode
0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group
(IRG)
0
04
Transfer Destination Number
If Transfer mode is (Refer to
13-04-03):
1 = Internal Dial Mode
1~9, 0, ,
#
, P, R, @
(Maximum 24 Characters)
2 = Incoming Ring Group
0 ~ 100 (IRG Number)
P=Pause
R=Recall
@= Additional Digits when
using ISDN functionality
No
Setting
13-04-03