NEC Univerge SV8100 Programming Manual - page 224
Issue 1.0
UNIVERGE SV8100
2 - 184
Program 15 : Extension, Basic Setup
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set
the priority (1~4) for the Virtual Extension Ring Tones set in Program 15-08. When
Virtual Extension calls ring an extension simultaneously, the tone with the highest
order number (e.g., 1) rings. The other keys only flash. There are 256 Virtual
Extension ports.
Default
By default, Virtual Extension ring tones have the following order:
Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level:
SA
Input Data
Extension Number
Up to eight digits
Item
No.
Priority
Order
Data
Description
Related
Program
01
1~4
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
When two or more virtual
extensions are set on a
function key on the telephone,
and the tone pattern by which
the sound of each extension
differs, the priority of ring
sound is set up.
15-08
Priority
Order
Ring Tone
(Set in Program 15-08)
1
0 (Tone Pattern 1)
2
1 (Tone Pattern 2)
3
2 (Tone Pattern 3)
4
3 (Tone Pattern 4)