NEC Univerge SV8100 Programming Manual - 90-11 : System Alarm Report
Issue 1.0
UNIVERGE SV8100
2 - 714
Program 90 : Maintenance Program
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm
report.
Program 90 : Maintenance Program
90-11 : System Alarm Report
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
02
Report Method
When alarm reports are to be e-mailed, set this
option to 1. E-mail address set in 90-11-08.
0 = No Report
1 = E-mail Address
0
04
--- Not Used ---
06
SMTP Host Name
When alarm reports are to be e-mailed, set the
SMTP name (ex: smtp.yourisp.com). Contact your
ISP (internet service provider) for the correct entry
if needed.
Up to 255 Characters
No
Setting
07
SMTP Host Port Number
When alarm reports are to be e-mailed, set the
SMTP host port number. Contact your ISP
(internet service provider) for the correct entry if
needed.
0~65535
25
08
To E-mail Address
When alarm reports are to be e-mailed, set this
e-mail address to which the report should be sent.
Up to 255 Characters
No
Setting
09
Reply Address
When alarm reports are to be e-mailed, set the
e-mail address where replies should be e-mailed.
Up to 255 Characters
No
Setting
10
From Address
When alarm reports are to be e-mailed, set this
e-mail address for the station sending the report.
Up to 255 Characters
No
Setting
11
DNS Primary Address
When alarm reports are to be e-mailed, set the
DNS primary address.
0.0.0.0~255.255.255.255
0.0.0.0