NEC Univerge SV8100 Programming Manual - page 209
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Programming Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
812
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 169
Conditions
15-05-04 – Nickname must be unique in the system.
Feature Cross Reference
None
30
DTMF Play
during
Conversation
at Receive
Extension
0 = Do Not Play
1 = Play
0
31
Alarm Tone
during
Conversation
(RTP packet
loss alarm)
0 = Off
1 = On
1
32
Ten Key Pad
Talkie
0 = Off
1 = On
0
33
LAN Side IP
Address of
Terminal
0.0.0.0~255.255.255.255
0.0.0.0.
Read-only
34
Terminal Touch
Panel On/Off
0 = Off
1 = On
1
Whether the touch screen
used on ITL-320C-1 (BK)
TEL can be used (On) or
cannot be used (Off).
Item
No.
Item
Input Data
Default
Description
Related
Program