NEC Univerge SV8100 Programming Manual - page 521
Programming Manual
2 - 481
Program
45
Description
Use
Program 45-01 : Voice Mail Integration Options
to customize certain voice
mail integration options.
Program 45 : Voice Mail Integration
45-01 : Voice Mail Integration Options
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Voice Mail Department Group Number
Assign which Extension (Department) Group
number is to be assigned as the voice mail
group.
0~64
0 = No Voice Mail
0
02
Voice Mail Master Name
Enter the Voice Mail Master Name.
Up to 12 Characters
VOICE
04
Park and Page
Enable/disable the system ability to process the
Voice Mail Park and Page ( ) commands. You
should normally enable this option.
0 = Off
1 = On
1
05
Message Wait
Enable/disable the system ability to process the
Voice Mail Message Wait (
#
) commands. You
should normally enable this option. If enabled,
be sure that the programmed Message
Notification strings don’t contain the code for
trunk access.
0 = Off
1 = On
1
06
Record Alert Tone Interval Time
This time sets the interval between Voice Mail
Conversation Record alerts
0~64800 (sec)
30
07
Centralized Voice Mail Pilot Number
This number is the same as the extension
number or pilot number.
Dial (up to eight
digits)
No Setting