NEC Univerge SV8100 Programming Manual - page 586
Issue 1.0
UNIVERGE SV8100
2 - 546
Program 50 : Common Channel Interoffice Signaling Service
Description
Use Program 50-03 : CCIS Destination System Settings to assign information of
remote systems in a CCIS Network.
Conditions
None
Feature Cross Reference
None
Program 50 : Common Channel Interoffice Signaling Service
50-03 : CCIS Destination System Settings
Level:
IN
Input Data
CCIS System ID
1~255
Item
No.
Item
Description
Input Data
Default
01
Destination Point
Code
Define the Point Code at the
Destination Party.
0~16367
0
02
CCIS Route ID
(T1 only)
Select the CCIS Route ID defined in
Program 14-13 when the user tries to
access the system in a CCIS network.
0~8
(CCIS Route IDs
5~8 are for
future use and
should not be
used.)
0
03
IP Address
(IP only)
Assign the IP Address to a CCIS
System ID.
xxx.xxx.xxx.xxx
(xxx = 0~255)
0.0.0.0
04
Point Code
Availability
Define if the system associated with
Destination Code can be Reached (1)
or Not Reach (0). If set to 0 (Disable),
when using the IP-CCIS that system
will not be able to be called until it is set
to 1 (Enable).
0:Disable
1:Enable
1