NEC Univerge SV8100 Programming Manual - page 98
Issue 1.0
UNIVERGE SV8100
2 - 58
Program 10 : System Configuration Setup
Description
Use Program 10-46 : DT700 Server Information Setup to setup the information of
SIP Multiline (DT700 series) Server.
Program 10 : System Configuration Setup
10-46 : DT700 Server Information Setup
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
Related
Program
01
Register Mode
0 = Normal mode:
When the phone boots up it
will report the ext. assigned
in the phone or choose the
next available extension in
the system. No password
is required.
1= Auto:
If set to Auto then the SIP
user name and password
must be entered into the
actual IP phone. These
settings must match 84-22/
15-05-27, or the phone will
not come on-line.
2 = Manual:
When the phone boots up it
will prompt user to enter a
user id and password
before logging in. It checks
this user id/password
against 84-22/15-05-27. If
there is no match, the
phone will not come on-
line.
0 = Normal
1 = Auto
2 = Manual
0
04
Server Name
Assign the Server name to
be used in the SIP URL.
Up to 32 characters
sipphd