NEC Univerge SV8100 Programming Manual - page 773
UNIVERGE SV8100
Issue 1.0
Programming Manual
2 - 733
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-36 : Firmware Update Time Setting to define the data for the
firmware update feature. This data is available to set for the WebPro/PC
Programming FW update feature. A compact flash card must be inserted in the
CD-CP00-US for this feature.
The following firmware is available to update with this feature:
main.bin
Dspdbu.bin
dsp.bin
Program 90 : Maintenance Program
90-36 : Firmware Update Time Setting
Level:
IN
Item
No.
Item
Input Data
Default
Description
01
Firmware Update
Schedule Time
Year: 0~99
0
This Program sets the time to
update the firmware using a
compact flash card.
Time registration fails if an
expired time is registered.
Month: 0~12
0
Day: 00~31
0
Hour: 00~23
0
Minute: 00~59
0
02
Update mode
0 = Non Active
1 = Activated
0
This Program activates the
Firmware Update feature. If
this setting is 1, new firmware
on the compact flash card
updates according to the setting
at 90-36-01.