NEC Univerge SV8100 Programming Manual - page 358
Issue 1.0
UNIVERGE SV8100
2 - 318
Program 23 : Answer Features Setup
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes (set in
Program 14-06) to extensions for Universal Answer. If the call ringing the paging
system is in an extension assigned route, the user can dial the Universal Answer
code (
#
0) to pick up the call.
You can also use this program to let an extension user automatically answer trunk
calls that ring other extensions (not their own). When the user lifts the handset, they
automatically answer the ringing calls based on Trunk Group Routing programming
(defined in Program 14-06). The extension user ringing calls, however, always have
priority over calls ringing other co-worker extensions. Refer to the Line Preference
feature in the UNIVERGE SV8100 Features and Specifications Manual for more
information.
Make one entry for each Night Service mode.
Program 23 : Answer Features Setup
23-03 : Universal Answer/Auto Answer
Level:
IN
Input Data
Extension Number
Maximum 8 digits
Item
No.
Day/Night
Mode
Route
Table
Number
Default
Description
Related
Program
01
1~8
0~100
0
Use this program to let an extension
user automatically answer trunk calls
that ring other extensions. When the
user lifts the handset, they
automatically answer the ringing calls
based on Trunk Group Routing
programming (defined in Program
14-06).
14-06