NEC Univerge SV8100 Programming Manual - page 150
Issue 1.0
UNIVERGE SV8100
2 - 110
Program 11 : System Numbering
Description
Use
Program 11-20 : Dial Extension Analyze Table
to define the dial type based on
three or more digits. This program is only relevant if digits in 11-01-01 are set to 9
(Dial Extension Analyze).
Default
Dial Extension Analyze Tables are not set at default.
Conditions
When the system uses the Dial Extension Analyze Table to determine the dial
type, the lower table has priority. For example, if Table 1 has 211 defined and
Table 2 has 2113 defined, Table 1 is used to determine the dial type.
Feature Cross Reference
None
Program 11 : System Numbering
11-20 : Dial Extension Analyze Table
Level:
IN
Input Data
Dial Extension Analyze Table
01~128
Item No.
Dial Extension Analyze Table
01
Dial (Up to eight digits: 0, 1~9,
#
, , @)
02
Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access