NEC Univerge SV8100 Programming Manual - page 206
Issue 1.0
UNIVERGE SV8100
2 - 166
Program 15 : Extension, Basic Setup
Description
Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic
settings for an IP telephone.
Program 15 : Extension, Basic Setup
15-05 : IP Telephone Terminal Basic Data Setup
Level:
IN
Input Data
Extension Number
Maximum eight digits
Item
No.
Item
Input Data
Default
Description
Related
Program
01
Terminal Type
0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = SIP-MLT
0
Viewing Only – No changes
permitted
02
IP Phone Fixed
Port
Assignment
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00
MAC Address of registered
SIP MLT phone is stored
and/or can input the MAC
address of an SIP MLT
phone so when it comes
online it will be provided with
the extension in which the
MAC address matches.
15-05-01
04
Nickname
Up to 48 characters
No setting
Nickname section on Invite
message. Example:
Extension 100 has a
Nickname set to PAUL.
Extension 101 has
command 15-05-17 set to
Nickname. The inbound call
to extension 101, from 100,
will show PAUL.
15-05-17
07
Using IP
Address
0.0.0.0~255.255.255.255
0.0.0.0
Informational Only
registered IP Phones
15-05-01
15
CODEC Type
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
1
Assign the CODEC Type of
the MLT SIP.
84-24-XX