NEC Univerge SV8100 Programming Manual - page 228
Issue 1.0
UNIVERGE SV8100
2 - 188
Program 15 : Extension, Basic Setup
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch
key data for each multiline terminal.
For each UNIVERGE SV8100 Wireless telephone to use the Transfer When Out of
Range feature, enter the destination number (up to 24 digits) and name (up to 12
characters) into One-Touch bin 10. Make sure to add any required trunk access
codes for outside numbers. If this bin information is changed either through 15-14-01
or through user programming, the destination for the transferred calls is also
changed.
Default
No entries for any extension.
Conditions
None
Feature Cross Reference
One-Touch Keys
Program 15 : Extension, Basic Setup
15-14 : Programmable One-Touch Keys
Level:
IN
Input Data
Extension Number
Maximum eight digits
Key Number
01~10
Item
No.
Dial Data
Name
Default
01
1~0, ,
#
, Pause, Hook-
flash,
@ (Code for Answer-Wait)
Up to 24 digits
Up to 24 Digits
No Setting
02
Name
Up to 12 Digits
No Setting