NEC Univerge SV8100 Programming Manual - page 254
Issue 1.0
UNIVERGE SV8100
2 - 214
Program 20 : System Option Setup
09
Hotline/Extension Ringdown
Turns off or on Ringdown Extension for
extensions with this COS.
0 = Off
1 = On
0
0
10
Signal/Voice Call
Turns off or on an extension allowing it to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
1
1
11
Protect for the Call Mode Switching from
Caller
(Internal Call)
0 = Off
1 = On
0
0
12
Department Group Step Calling
Turns off or on an extension to use Department
Group Step Calling.
0 = Off
1 = On
1
1
13
ISDN CLIP
Determines if the ISDN calling line identity
presentation and screening indicators are
allowed.
0 = Off
1 = On
0
0
10-03-05
15-01-04
14
Call Address Information
0 = Off
1 = On
0
0
15
Block Outgoing Caller ID
Turns off or on the system ability to
automatically block outgoing Caller ID
information when a user places a call.
If this option is on, the system automatically
inserts the Caller ID block code (defined in
Program 14-01-21) before the user-dialed digits.
0 = Off
1 = On
0
0
14-01-20
14-01-21
16
Display E911 Dialed Extension Name and
Number
Turns off or on an extension to display the name
and number of the extension that dialed 911.
0 = Off
1 = On
0
0
17
ARS Override of Trunk Access Map
Turns off or on an extension ability to override
the trunk access map programming for outgoing
calls.
0 = Off
1 = On
0
0
19
Hotline for SPK
The ability of an extension to have Hotline
activated or deactivated when going off hook via
the speaker key.
0 = Off
1 = On
0
0
20-08-09
20
Hot Key Pad
The ability of an extension to make a call by just
dialing the number without first going off hook.
0 = Off
1 = On
0
0
Item
No.
Item
Input
Data
Default
Related
Program
COS
01-14
COS
15