NEC Univerge SV8100 Programming Manual - 90-12 : System Alarm Output
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Programming Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
812
Issue 1.0
UNIVERGE SV8100
2 - 716
Program 90 : Maintenance Program
Description
Use Program 90-12 : System Alarm Output to set the options for the alarm report.
This program has six separate menu options. Define the output port to be used as the
output for system alarm report and set the system alarm options. The system can
have up to 50 reports.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-12 : System Alarm Output
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Output Port Type
Indicate the type of connection used for the System
Alarms. The baud rate for the COM port should be
set in Program 10-21-02.
0 = No Setting
1~3 = -- Reserved --
4 = CTA/CTU
5 = USB Memory
0
02
CTA Output Destination Extension Number
Up to 8 digits
No Setting