Jeep Cherokee 2000 Service Manual - page 1113
(35) Remove the exhaust system support clamp
(Fig. 17).
(36) Remove the clutch slave cylinder from the
clutch housing (Fig. 18).
(37) Remove the (3) nuts retaining the transfer
case shift linkage and position the linkage aside (Fig.
19).
Fig. 16 Engine Ground Wire Location
1 – RIGHT ENGINE MOUNT THROUGHBOLT NUT
2 – ENGINE GROUND WIRE
3 – OIL PAN
Fig. 17 Exhaust System Inlet Pipe Connection
1 – OIL PAN
2 – EXHAUST INLET PIPE FLANGE RETAINING BOLTS
3 – EXHAUST SYSTEM SUPPORT CLAMP
Fig. 18 Clutch Slave Cylinder
1 – CLUTCH SLAVE CYLINDER
2 – CLUTCH SLAVE CYLINDER RETAINING NUTS
3 – FRONT DRIVESHAFT
Fig. 19 Transfer Case Shift Linkage — 4x4
1 – FRONT DRIVESHAFT
2 – SHIFTER LINKAGE RETAINING NUTS
3 – TRANSFER CASE
4 – TRANSMISSION
XJ
ENGINE
9 - 19
REMOVAL AND INSTALLATION (Continued)