Jeep Cherokee 2000 Service Manual - page 1692
Other manuals for Cherokee 2000:
Service Manual
of
1970
(16) Remove shift sector bushing and O-ring (Fig.
38).
INPUT GEAR/LOW RANGE ASSEMBLY REMOVAL AND
DISASSEMBLY
(1) Remove front bearing retainer bolts.
(2) Remove front bearing retainer. Carefully pry
retainer loose with screwdriver (Fig. 39). Position
screwdriver in slots cast into retainer.
(3) Remove input gear snap-ring (Fig. 40).
Fig. 36 Low Range Fork And Hub Removal
1 – LOW RANGE FORK
2 – FORK HUB
Fig. 37 Shift Sector Position
1 – SHIFT SECTOR
2 – LOW RANGE FORK
3 – PIN
4 – SLOT
Fig. 38 Sector Bushing And O-Ring Removal
1 – SHIFT SECTOR BUSHING
2 – O-RING
Fig. 39 Front Bearing Retainer Removal
1 – FRONT BEARING RETAINER
2 – RETAINER SLOT
XJ
NV242 TRANSFER CASE
21 - 387
DISASSEMBLY AND ASSEMBLY (Continued)