Jeep Cherokee 2000 Service Manual - page 510
Other manuals for Cherokee 2000:
Service Manual
of
1970
(5) Cut the Christmas tree fastener to remove the
Heated Seat Relay fastener from the mounting
bracket. Unplug the wire harness connector from the
relay (Fig. 3).
(6) Reverse the removal procedures to install. A
new Christmas tree fastener must be used to mount
the relay. Be certain that the relay terminals are
aligned with the cavities in the wire harness connec-
tor before pushing the relay firmly into place.
Fig. 3 Heated Seat Relay Remove/Install
1 – HEATED SEAT RELAY
2 – SEAT CUSHION FRAME
3 – WIRE HARNESS CONNECTOR
4 – POWER SEAT TRACK FRONT BRACKET
XJ
ELECTRICALLY HEATED SYSTEMS
8N - 13
REMOVAL AND INSTALLATION (Continued)