Jeep Cherokee 2000 Service Manual - page 1705
Other manuals for Cherokee 2000:
Service Manual
of
1970
(4) Install drive sprocket snap-ring (Fig. 84).
OIL PUMP AND REAR CASE INSTALLATION
(1) Insert oil pickup tube in oil pump and attach
oil screen and connector hose to pickup tube. Then
install assembled pump, tube and screen in rear case
(Fig. 85). Be sure screen is seated in case slot as
shown.
(2) Install magnet in front case pocket (Fig. 86).
Fig. 83 Drive Chain And Sprocket Installation
1 – FRONT OUTPUT SHAFT
2 – DRIVE CHAIN
3 – DRIVE SPROCKET
Fig. 84 Drive Sprocket Snap-Ring Installation
1 – DRIVE SPROCKET
2 – DRIVE SPROCKET SNAP RING
Fig. 85 Oil Screen And Pickup Tube Installation
1 – OIL PUMP
2 – OIL SCREEN
3 – CONNECTOR
4 – PICKUP TUBE
Fig. 86 Installing Case Magnet
1 – MAGNET
21 - 400
NV242 TRANSFER CASE
XJ
DISASSEMBLY AND ASSEMBLY (Continued)